四苯基卟啉衍生物的拉曼光谱

介绍四苯基卟啉（TPP）及其中位取代氨基和硝基的拉曼光谱, 并讨论了给电子和吸电子取代基团对卟啉骨架振动的影响, 得出该取代对卟啉C_a—C_m和C_b—C_b的伸缩振动规律, 与四苯基卟啉相比, 引入给电子基团（氨基）使C_a—C_m向高波数方向移动, 吸电子（硝基）使C_a—C_m向低波数方向移动.      

Conformations and adsorption behavior of poly（allylamine hydrochloride） studied by single molecule force spectroscopy

Poly（allylamine hydrochloride） （PAH）, which is frequently used in fabricating polyelectrolyte multilayer films, was studied by single molecule force spectroscopy （SMFS）. Plenty of force-extension curves with a long plateau were obtained in water, indicating that train-like structure was predominant when PAH was adsorbed on the substrate. It was found that the peak-type force-extension curves of PAH in water were not able to be fitted by the modified freely-jointed chain model. Additionally, there was a flat region in the derivative of force-extension curves. Thus, it was inferred that PAH chain in water was in a special conformation and underwent a ＂conformational transition＂ under the stretching of an external force. This phenomenon did not appear in the SMFS experiment in 1 mol/L urea solution, which indicated that urea was able to break the special conformation.     

近红外光谱定量检测丙烷和异丁烷

近红外光谱分析技术结合偏最小二乘法（PLS）对多成分挥发性有机物（VOCs）进行连续的在线监测具有重要意义．用傅里叶变换红外光谱仪（FTIR）分析了丙烷和异丁烷2种挥发性有机物的近红外光谱特征．采用线性回归建模方法——偏最小二乘法在丙烷和异丁烷混合气体的近红外光谱范围（5600～6200cm^-1）内建立了预测模型．基于该模型预测了验证集样品中2种气体的含量,并对模型进行了评价．结果表明,对2种气体浓度的预测比较准确,相对误差基本在5％以内．     

Au@SiO2颗粒对石墨烯量子点拉曼信号的增强作用

采用金纳米颗粒包覆了一层二氧化硅壳层作为实验材料,利用该核壳材料增强石墨烯量子点的拉曼信号,并实现了单颗粒增强.实验中,二氧化硅的厚度可以通过反应时间得到控制,该壳层可以增强金纳米颗粒的化学和物理稳定性.本文方法与使用纯金纳米颗粒增强石墨烯量子点拉曼信号相比,其拉曼信号强度增强了20%以上.     

Cu~(2+)、Fe~(3+)、Zn~(2+)对香豆素-3-羧酸与牛血清白蛋白相互作用的影响

用荧光光谱法研究Cu~(2+)、Fe~(3+)、Zn~(2+)对香豆素-3-羧酸与牛血清白蛋白(BSA)相互作用的影响.结果表明:三种金属离子均能增强香豆素-3-羧酸对BSA的荧光猝灭及两者的结合作用,使体系的荧光猝灭常数、结合常数增大;Zn~(2+)的存在没有改变两者的作用力类型,仍以疏水作用力为主,Cu~(2+)、Fe~(3+)存在下,作用力变为以静电引力为主.表明Cu~(2+)、Fe~(3+)、Zn~(2+)对香豆素-3-羧酸与牛血清白蛋白的作用有重要影响.     

基于金纳米花表面增强拉曼散射光谱的三聚氰胺检测方法

以罗丹明6G为探针分子,结合紫外-可见吸收光谱,优化了两种还原剂:抗坏血酸和盐酸羟胺的加入体积,确定了金纳米花的最佳合成条件.以制备的金纳米花为增强试剂,结合便携式拉曼光谱仪,建立了可用于三聚氰胺检测的分析方法.以679 cm-1处特征峰为定量依据,确定该方法线性检测范围为5~100μmol/L,标准偏差R2=0.9875,检测限达到1μmol/L,远低于国家标准(19.8μmol/L).     

表面增强拉曼散射光谱同时检测4种痕量多环芳烃

合成了植酸保护的纳米金,其具有较强的疏水性和表面增强拉曼散射(SERS)活性.利用小型拉曼光谱仪和分子光谱的指纹信息特征,建立可同时分析水中多种多环芳烃的SERS分析方法.多环芳烃检出限如下:蒽为100μg/L,荧蒽为100μg/L,芘达到10μg/L和苯并芘可达1μg/L.     

VO2(A)纳米杆的水热合成、生长机理及光学特性

用V2O5和草酸作为初始原料,在水热条件下合成了VO2(A)纳米杆.通过改变初始的V2O5与草酸摩尔比以及反应时间制备纯相VO2 (A).样品的元素组成、微结构及光学性能分别被X射线光电子能谱(XPS)、X射线衍射(XRD)、扫描电镜(SEM)、差示扫描量热法(DSC)和傅里叶变换红外光谱(FT-IR)表征.实验结果表明合成VO2 (A)的最佳条件为:反应温度230℃、保温24 h以及V2O5对草酸摩尔比为1∶1.5.结合XRD数据与SEM图像,提出一个转变、自组装和重结晶过程解释了VO2 (A)纳米棒的形成过程.     

Electrochemical and spectroscopic study of interfacial interactions between chalcopyrite and typical flotation process reagents

Comparative voltammetry and differential double-layer capacitance studies were performed to evaluate interfacial interactions between chalcopyrite (CuFeS₂) and n-isopropyl xanthate (X) in the presence of ammonium bisulfite/39wt% SO₂ and caustic starch at different pH values. Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, contact angle measurements, and microflotation tests were used to establish the type and extent of xanthate adsorption as well as the species involved under different mineral surface conditions in this study. The results demonstrate that the species that favor a greater hydrophobicity of chalcopyrite are primarily CuX and S0, whereas oxides and hydroxides of Cu and Fe as well as an excess of starch decrease the hydrophobicity. A conditioning of the mineral surface with ammonium bisulfite/39wt% SO₂ at pH 6 promotes the activation of surface and enhances the xanthate adsorption. However, this effect is diminished at pH ≥ 8, when an excess of starch is added during the preconditioning step.     

Analysis of Pyrolysates for Phenol Formaldehyde Resin by Py-GC/MS

Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.